|
The SatLink 1000 is the leading DVB-RCS certified VSAT Indoor Unit, with support
for DVB-S2 and DVB-S forward links. Optimized for IP networking its cost-effective
design, packaging, and easy operation make it ideal for Internet access services
to consumers and small businesses. Yet it has the advanced QoS, traffic acceleration,
VPNs and other value-added software features required for carrier-class interactive
data, voice, and video conferencing, plus multicast IP applications. Users connect
via Ethernet. The SatLink 1000 supports various antennas options, plus BUCs/LNBs
in C, Ku, Ka and EHF bands.![]() |
![]() |
Cost-Effective, High-Volume VSAT
SatLink 1000 delivers the price-performance for small business and residential broadband Internet services
Bandwidth Efficiency at Many Levels
Advanced DVB-S2 modulation and FEC, header compression, section packing & intelligent
bandwidth-on-demand algorithms enable efficient broadband applications; the unit
consumes only 64 bps when idle, 0 bps in "auto-sleep" mode.
Comprehensive IP Networking Features
SatLink delivers TCP and HTTP acceleration, VPN, NAT, and VLAN options, plus a built-in
DHCP server and both unicast and multicast IP routing.
Advanced QoS for Data, Voice, Video
QoS Groups for bandwidth-on-demand enable delay sensitive traffic for interactive
media concurrently with bulk data, without dedicating bandwidth per VSAT.
Fanless, Compact Consumer Packaging
The SatLink 1000's compact size, fanless operation, external power supply, and vertical
mounting option makes it ideal for office desktop and residential uses.
Simple, Consumer-Friendly Operation
Engineered for plug & play operation and simple enough for self-installation, the
SatLink 1000 allows all necessary software updates and remote management via satellite
from the hub.
ACM and Rain Fade Mitigation
Adaptive Coding and Modulation (ACM) on forward links and adaptive FEC and symbol
rate on return links increase bandwidth efficiency and improves link margins
to mitigate rain fades.
BUCs up to 3 Watts with Power Control
Internal power for BUCs up to 3 Watts; automatic power control from the hub simplifies
installation, and optimizes operation and bandwidth use.
|
![]() |
Capacity
Throughput: Up to 12 Mbps of IP packets at 1500 bytes (varies with IP software features
enabled)
IP QoS and Bandwidth-on-Demand
Traffic Classification: May use combination of 802.1p, DSCP, Protocol Type, IP Source
Address, IP Destination Address, TCP/UDP Source Port or Destination Port
QoS Treatment: Three QoS Groups with multiple priority queue; option for 7 QoS Groups plus discard group Capacity Requests: DRBC, VDBC, AVDBC and FCA in combination, (and CRA for static assignments)
IP Packet Encapsulation & Compression
Format:/ S2: ETSI EN 300 421 / EN 302 307
International: Country specific certifications
Receive (DVB-S2)
Modulation: 1 to 35 Msps with choice of MODCODS:
Roll-off Factor: 20%, 25%, or 35% Modes: CCM, VCM, ACM (DVB-S mode also supported for legacy
Transmit (DVB-RCS)
Modulation: QPSK
Symbol Rates: 125 Ksps to 3 Msps FEC Rates: 1/2, 2/3, 3/4, 4/5, 6/7 (Turbo Codes) Frequency Hopping: Slow
Physical Interfaces
Serial Port: RS-232, DB-9 (local management)
Ethernet: 10/100Tx Mbps, RJ-45 (user IP traffic) Tx (BUC) Interface: F-type 75 Ohm; 24 VDC at up to 1.2A, plus 10 MHz reference under software control.
Front LEDs: Power, Error, Tx, Rx, Ethernet Link/Activity
Electrical, Environmental & Physical
Power Supply: 110-240 VAC, 50-60 Hz, external (incl’d)
Power Consumption: 8 W (IDU only); 30 W @ P1dB with SatLink 4033 2W transceiver Operating Temperature: 0 to 45 °C Storage Temperature: -20 to 85 °C Humidity: 20% to 90% non-condensing Size: 33 x 22 x 3.5 cm Weight: 954 grams |